Brake Rotor/Disc

Front Brakes
Caliper Bracket Bolts (J65, JL9) 180 N.m (133 lb ft)
Caliper Bracket Bolts (Z7U) 185 N.m (136 lb ft)
Caliper Pin Bolts (J65, JL9) 95 N.m (70 lb ft)
Caliper Pin Bolts (Z7U) 60 N.m (44 lb ft)
Screw, Front Brake Rotor Retaining (Z7U) 12 N.m (106 lb in)
Front Brake Rotors
Rotor Discard Thickness *
(J65, JL9) 30.7 mm (1.21 in)
Rotor Discard Thickness *
(Z7U) 29.0 mm (1.14 in)
Rotor Maximum Allowable Lateral Runout
(J65, JL9) 0.060 mm (0.002 in)
Rotor Maximum Allowable Lateral Runout
(Z7U) 0.030 mm (0.0012 in)
Rotor Maximum Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation
J65, JL9 0.025 mm (0.001 in)
Z7U 0.006 mm (0.00024 in)
Rotor Minimum Allowable Thickness After Refinishing
J65, JL9 31.0 mm (1.22 in)
Z7U 30.0 mm (1.18 in)
Rotor Thickness-NEW
J65, JL9 32.2 mm (1.27 in)
Z7U 32.0 mm (1.26 in)
Rear Brake Rotors
Rotor Discard Thickness *
(J65, JL9) 12.5 mm (0.49 in)
Rotor Discard Thickness *
(Z7U) 23.0 mm (0.91 in)
Rotor Maximum Allowable Lateral Runout
J65, JL9 0.05 mm (0.002 in)
Z7U 0.0305 mm (0.0012 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation
J65, JL9 0.02 mm (0.001 in)
Z7U 0.006 mm (0.00024 in)
Rotor Minimum Thickness After Refinishing
J65, JL9 12.9 mm (0.51 in)
Z7U 24.0 mm (0.945 in)
Rotor Thickness-NEW
J65, JL9 14.00 mm (0.55 in)
Z7U 26.00 mm (1.024 in)

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.