Trunk / Liftgate Latch: Service and Repair

Liftgate Latch Replacement

Removal Procedure




1. Open the liftgate.
2. Remove the liftgate trim panel.
3. Disconnect the latch cable (1).
4. Disconnect the electrical connector (5) from the liftgate latch (3).
5. Disconnect the rod (2) from the lock cylinder.
6. Remove the bolts (4) from the liftgate latch (3).
7. Remove the liftgate latch (3) from the liftgate.

Installation Procedure




1. Install the liftgate latch (3) to the liftgate.

Notice: Refer to Fastener Notice.

2. Install the bolts (4) to the liftgate latch (3).

Tighten the liftgate latch bolts (4) to 7 N.m (62 lb in).

3. Connect the rod (2) to the lock cylinder.
4. Connect the electrical connector (5) to the liftgate latch (3).
5. Connect the latch cable (1).
6. Install the liftgate trim panel.
7. Close the liftgate.