Rear Floor Console Replacement

Rear Floor Console Replacement

Removal Procedure




1. Remove the console box insert (6).
2. Open console lid.
3. Remove the console box damper (1).
4. Remove the 2 front bolts (5).
5. Remove the 2 rear bolts (2).
6. Disconnect the electrical connector (4).
7. Remove rear console (3).

Installation Procedure




1. Connect the electrical connector (4).
2. Install the front floor rear console (3) to the vehicle.
3. Lower the parking brake lever.

Notice: Refer to Fastener Notice.

4. Install the front 2 bolts (5) to the front compartment of the rear console and the 2 rear bolts (2) to the rear of the console (3).

Tighten the console bolts to 15 N.m (11 lb in).

5. Install the front insert (6) to the rear console (3).
6. Install the console box damper (1) to the rear compartment of the rear console (3).