Instrument Panel Center Support Bracket Replacement

Instrument Panel Center Support Bracket Replacement

Removal Procedure

1. Remove the upper instrument panel assembly.
2. Remove the lower instrument panel assembly.
3. Remove the connector housing bracket from the right I/P center support brace.




4. Remove the following components from the vehicle:

* The left brace nut (10)
* The right brace nut (5)
* The left brace bolt (8)
* The right brace bolt (7)
* The left I/P center support brace (9)
* The right I/P center support brace (6)

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the left I/P center support brace (9) and the right I/P center support brace (6) to the vehicle. Secure the braces with the following retainers:

* The left brace nut (10)
* The right brace nut (5)
* The right brace bolt (7)
* The left brace bolt (8)

Tighten the I/P center support brace nuts and bolts to 20 N.m (15 lb ft).

2. Install the connector housing bracket to the right I/P center support brace.
3. Install the lower instrument panel assembly.
4. Install the upper instrument panel assembly.