Power Accessory Switch Panel Replacement

Power Accessory Switch Panel Replacement

Removal Procedure




1. Using a taped flat bladed tool, gently pry up on the front of the side door accessory switch mounting plate (1), and slide forward from the front side door trim (2).




2. Disconnect the front side door window/lock switch electrical connector (2).




3. Remove the following components from the front side door window/lock switch (3):

* The 3 screws (1)
* The front side door accessory switch mounting plate (2)

Installation Procedure




1. Install the front side door window/lock switch (3) to the front side door accessory switch mounting plate (2). Secure the switch with the 3 screws (1).




2. Connect the front side door window/lock switch electrical connector (2).




3. Position the front side door accessory switch mounting plate (2) to the front side door trim (1), and slide rearward, making sure the retaining tabs are engaged.