Rear Quarter Upper Trim Panel Replacement

Rear Quarter Upper Trim Panel Replacement

Removal Procedure




1. Open the seat belt shoulder anchor cover (1) using a flat bladed tool.
2. Remove the shoulder anchor bolt (8).
3. Remove the seat belt shoulder anchor (7) from the vehicle.




4. Remove the lower quarter trim panel.
5. Disengage the 7 plastic retainers (1) which secure the quarter upper trim panel (2).
6. Remove the quarter upper trim panel (2) from the vehicle.

Installation Procedure




1. Install the quarter upper trim panel (2) to the vehicle. Ensure that the plastic retainers are fully engaged.
2. Install the quarter lower trim panel.





Notice: Refer to Fastener Notice.

3. Install the seat belt shoulder anchor (7) to the vehicle and secure with shoulder anchor bolt (8).

Tighten the seat belt shoulder anchor bolt to 41 N.m (30 lb ft)

4. Close shoulder anchor cover (1).