Rear Seat Cushion Replacement

Rear Seat Cushion Replacement

Removal Procedure




1. Remove the rear seat back trim panel.
2. Remove the 2 pivot bolts (2).
3. Remove the 2 lower mounting bolts (4).
4. Pull the rear seat cushion forward in order to remove the cushion from the vehicle.

Installation Procedure




1. Slide the rear seat cushion into position. Ensure that the seat belt buckles are properly position through the cushion.
Notice: Refer to Fastener Notice.

2. Install the 2 lower mounting bolts (4)

Tighten the lower mounting bolts (4) to (41 N.m and 30 lb ft).

3. Install the 2 pivot bolts (2).

Tighten the pivot bolts (2) to (18 N.m and 13 lb ft).

4. Install the rear seat back trim panel.