Rear Door Weatherstrip Replacement

Rear Door Weatherstrip Replacement

Removal Procedure




1. Open the door.
2. Remove the bolt (3) that retains the rear door check link (2) to the door jamb.




3. Remove the following components from the door (2):

* The rear door weatherstrip (1)
* The plastic retainers

Installation Procedure




1. Install the rear door weatherstrip (1) to the door (2). Ensure that the plastic retainers are completely engaged.





Notice: Refer to Fastener Notice.

2. Install the bolt (3) that retains the rear door check link (2) to the door jamb.

Tighten the bolt to 5.5 N.m (49 lb in).