Radiator Cooling Fan: Service and Repair

Cooling Fan Replacement - Electric

Removal Procedure




1. Disconnect the reservoir hose from the radiator.
2. Disconnect the fan motor electrical connector.




3. If equipped with an air pump:
1. Disconnect the 2 hoses from the air pump outlet pipe (1).
2. Remove the 2 bolts from the air pump outlet pipe (2).
4. Disconnect the 2 fan motor electrical harness clamps from the fan shroud.
5. Remove the 2 fan shroud bolts.
6. Remove the fan shroud and motor assembly.
7. Remove the fan retaining nut.
8. Remove the 2 radiator fan mount bolts.
9. Remove the radiator fan motor.

Installation Procedure




1. Position the radiator fan and the radiator fan motor to the shroud.
Notice: Refer to Fastener Notice.

2. Install one radiator fan nut.

Tighten the radiator fan nut to 6.2 N.m (55 lb in).

3. Install the 2 radiator fan mount bolts.

Tighten the radiator fan bolts to 3.8 N.m (34 lb in).

4. Position the radiator fan and shroud assembly into the vehicle; then install the 2 fan shroud bolts.

Tighten the radiator fan shroud bolts to 6 N.m (53 lb in).

5. Connect the 2 fan motor electrical harness clamps to the fan shroud.
6. Connect the fan motor electrical connector.




7. If equipped with an air pump:
1. Install the 2 bolts to the air pump outlet pipe (2).

Tighten the air pump outlet pipe bolts to 7 N.m (62 lb in).

2. Connect the 2 hoses to the air pump outlet pipe (1).
8. Connect the reservoir hose to the radiator.