55. Timing Chain Tensioner Installation

Timing Chain Tensioner Installation




1. Use the following steps in order to install the timing chain tensioner:
1. Fully depress the plunger (4).
2. Apply the hook (2) to the pin (3).
3. Install the timing chain tensioner.





Notice: Refer to Fastener Notice.

2. Install the timing chain tensioner. Secure the timing chain tensioner using 2 bolts (1).

Tighten the timing chain tensioner bolts to 10 N.m (89 lb in).




3. Rotate the crankshaft clockwise one revolution. Ensure that the plunger on the timing chain tensioner has released.




4. Complete the following steps if the plunger does not release:
1. Use a screwdriver or your finger in order to press the slipper into the chain tensioner.
2. Release the hook from the pin.