Fog/Driving Lamp: Service and Repair

FRONT FOG LAMP REPLACEMENT

REMOVAL PROCEDURE

1. CAUTION: Refer to Halogen Bulb Caution.




Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the 2 screws (1) and push retainer (3) from the lower splash shield (2).
3. Disconnect the electrical connector from the fog lamp.




4. Pry out on tab (1) with a flat-bladded tool and remove fog lamp.




5. Remove the fog lamp bulb from the fog lamp, turning counterclockwise, if required.

INSTALLATION PROCEDURE




1. Install the fog lamp bulb to the fog lamp, turning clockwise, if required.




2. Install the fog lamp (1) to the front bumper fascia (2).




3. Connect the electrical connector to the fog lamp.
4. Install the two screws (1) and the push retainer (3) to the front lower splash shield (2).
5. Lower the vehicle.
6. Check and adjust the fog lamp aim as necessary. Refer to Fog Lamp Aiming.