Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2007 >> Vibe L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - M/T >> Clutch Pedal Position Sensor / Switch >> Service and Repair >> Clutch Pedal Engine Start Switch Replacement

Clutch Pedal Engine Start Switch Replacement



Clutch Pedal Engine Start Switch Replacement

Removal Procedure

1. Disconnect the clutch start switch electrical connector.




2. Remove the clutch start switch retaining nut, then the start switch.

Installation Procedure

Notice: Refer to Fastener Notice.

1. Install the clutch start switch and retaining nut.

Tighten the retaining nut to 16 N.m (12 lb ft).

2. Connect the clutch start switch electrical connector.
3. Check the clutch start switch for proper operation.

pro multis · About Operation CHARM