Liftgate Window Latch Replacement

LIFTGATE WINDOW LATCH REPLACEMENT

REMOVAL PROCEDURE




1. Open the liftgate.
2. Remove the liftgate trim panel.
3. Disconnect the window latch electrical connector (2) from the liftgate harness (1).
4. Remove the window latch electrical connector retainer (3) from the liftgate (4).
5. Close the liftgate.




6. Open the liftgate window.
7. Remove the bolts (3) from the rear liftgate window connector (4).
8. Remove the rear liftgate window connector (4) away from the liftgate (5).
9. Remove the bolts (2) from the liftgate window latch (1).
10. Pull liftgate window latch (1) away from liftgate (5) and disconnect the rod from the latch.

INSTALLATION PROCEDURE




1. Connect the rod to the liftgate window latch.
2. Install the liftgate window latch (1) to the liftgate (5).

3. NOTE: Refer to Fastener Note.

Install the bolts (2) to the liftgate window latch (1).

Tighten the liftgate window latch bolts to 7.0 N.m (62 lb in).

4. Install the rear liftgate window connector (4) to the liftgate (5).
5. Install the bolts (3) to the liftgate window connector (4).

Tighten the liftgate window connector bolts to 7.0 N.m (62 lb in).
6. Close the liftgate window.




7. Open the liftgate.
8. Install the liftgate window latch electrical connector retainer (3) to the liftgate (4).
9. Connect the liftgate window latch electrical connector (2) to the liftgate harness (1).
10. Install the liftgate trim panel.
11. Close the liftgate.