Instrument Panel Center Compartment Replacement

Instrument Panel Center Compartment Replacement

Removal Procedure





1. Use a plastic trim tool to remove the ignition switch bezel.




2. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair) .
3. Apply the park brake.
4. Shift the transaxle to 1.
5. Remove the I/P center compartment screws.
6. Remove the I/P center compartment.



Installation Procedure





1. Align the I/P center compartment locator to the opening in the vehicle location antenna module bracket.




2. Install the I/P center compartment to the I/P.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the I/P center compartment screws.

Tighten the screws to 2 N.m (18 lb in).

4. Shift the transaxle to P.
5. Press to release the park brake.
6. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair) .




7. Install the ignition switch bezel.