Procedures

Rotating the Engine for Service Access

Tools Required

J 41131 Engine Tilt Strap

1. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement (Service and Repair) .
2. Apply the parking brake.
3. Put the transaxle in the Neutral position.
4. Remove the engine mount struts. Refer to Engine Mount Strut Replacement - Right Side (Service and Repair) and Engine Mount Strut Replacement - Left Side (Service and Repair) .




5. Install the J 41131 (2) to the engine mount strut bracket (1) and the upper radiator support (3).
6. Rotate the engine forward for component access.