Front Side Door Window Belt Outer Sealing Strip Replacement

Front Side Door Window Belt Outer Sealing Strip Replacement

Removal Procedure






Notice: Refer to Paint Damage Notice .

1. Apply masking tape to the door and applique.
2. Lower the window to the full down position.
3. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement (Service and Repair) .
4. Loosen the outside rearview mirror. Refer to Power Mirror Replacement (Power Mirror Replacement) .
5. Remove the outer belt sealing strip screw (1).
6. Remove the outer belt sealing strip (2) from the door.



Installation Procedure






Important: Align the strip properly to the door inner panel for screw installation.


1. Install the outer belt sealing strip (2) to the door.
Press the outer belt sealing strip firmly onto the pinch-weld flange.

Notice: Refer to Fastener Notice .

2. Install the outer belt sealing strip screw (1).

Tighten the screw to 2 N.m (18 lb in).

3. Install the outside rearview mirror. Refer to Power Mirror Replacement (Power Mirror Replacement) .
4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement (Service and Repair) .
5. Inspect the window for proper operation.
6. Remove the masking.