Front Floor Console Compartment Replacement
Front Floor Console Compartment Replacement
Removal Procedure
1. Remove the floor console. Refer to Front Floor Console Replacement (Removal and Replacement) .
2. Remove the compartment mat.
3. Remove the armrest and the hinge. Refer to Front Floor Console Armrest Replacement (Removal and Replacement) .
4. Remove the accessory power receptacle from the console compartment. Refer to Floor Console Accessory Power Receptacle Replacement (Service and Repair) .
5. Reposition the wiring harness.
6. Remove the rear cover screws.
7. Remove the rear cover.
8. Remove the compartment screws.
9. Remove the side trim panel screws.
10. Remove the side trim panels.
11. Remove the compartment screws.
12. Remove the compartment.
Installation Procedure
1. Align the compartment to the upper trim plate.
Notice: Refer to Fastener Notice (Fastener Notice) .
2. Install the compartment screws.
Tighten the screws to 2 N.m (18 lb in).
3. Align the side trim panels to the locators.
4. Install the side trim panel screws.
Tighten the screws to 2 N.m (18 lb in).
5. Install the compartment screws.
Tighten the screws to 2 N.m (18 lb in).
6. Align the rear cover to the floor console.
7. Install the rear cover screws.
Tighten the screws to 2 N.m (18 lb in).
8. Install the wiring harness.
9. Install the accessory power receptacle to the console compartment. Refer to Floor Console Accessory Power Receptacle Replacement (Service and Repair) .
10. Install the armrest and the hinge. Refer to Front Floor Console Armrest Replacement (Removal and Replacement) .
11. Install the compartment mat.
12. Install the floor console. Refer to Front Floor Console Replacement (Removal and Replacement) .