Door Lock Cylinder Replacement

Door Lock Cylinder Replacement

Removal Procedure






Important: Do not attempt repairs in order to correct lock cylinder discrepancies. Replace the lock cylinder.


1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement (Service and Repair) .
2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement (Service and Repair) .
3. Remove the front door outside handle. Refer to Front Side Door Outside Handle Replacement (Service and Repair) .
4. Remove the lock paw retaining clip (7).
5. Remove the locking rod (6).
6. Remove the lock cylinder paw (5).
7. Remove the lock cylinder retaining clip (3).
8. Remove the lock cylinder (4) from the outside door handle.
Pull rearward on the lock cylinder to remove it from the handle.



Installation Procedure





1. Install the lock cylinder (4) into the outside door handle.
2. Install the lock cylinder retaining clip (3).
3. Install the lock cylinder paw (5).
4. Install the lock cylinder paw retaining clip (7).
5. Inspect the lock cylinder with the key for proper operation.
6. Install the locking rod (6).
7. Install the front door outside handle. Refer to Front Side Door Outside Handle Replacement (Service and Repair) .
8. Inspect the door for proper operation.
9. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement (Service and Repair) .
10. Install the front door trim panel. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .