Front Seat Back Cushion Cover Replacement (Fold Flat)

Front Seat Back Cushion Cover Replacement (Fold Flat)

Removal Procedure

1. Remove the seat back panel. Refer to Front Seat Back Panel Replacement (Front Seat Back Panel Replacement) .
2. Remove the front seat head restraint. Refer to Front Seat Head Restraint Replacement (Front Seat Head Restraint Replacement) .




3. Remove the J-hooks on the back side of the trim cover.




4. Remove the hook and loop connectors on the lower back side of the trim cover.
5. Remove the head restraint retainers. Refer to Front Seat Head Restraint Retainer Replacement (Front Seat Head Restraint Retainer Replacement) .




6. Remove the hog rings from the trim cover to the lower pad.
7. Remove the cover from the seat back by pulling the cover up and over the pad.



Installation Procedure

1. Position the seat trim cover on the seat back.
2. Install the head restraint retainers but not the head restraint. Refer to Front Seat Head Restraint Retainer Replacement (Front Seat Head Restraint Retainer Replacement) .
3. Pull the trim cover down over the pad.




4. Install the J-hooks on the back side of the trim cover.




5. Install the hook and loop connectors on the lower back side of the trim cover.




6. Install the hog rings.
7. Install the seat back panel. Refer to Front Seat Back Panel Replacement (Front Seat Back Panel Replacement) .
8. Install the head restraint. Refer to Front Seat Head Restraint Replacement (Front Seat Head Restraint Replacement) .