Center Mounted Brake Lamp: Service and Repair

High Mount Stop Lamp Replacement

Removal Procedure

Important: The spoiler mounted stop lamp has no serviceable bulbs. The lamp is serviced as a complete assembly.







1. Remove the spoiler from the rear compartment lid. Refer to Rear Spoiler Replacement (Service and Repair) .
2. Remove the screws from the stop lamp.




3. Remove the stop lamp from the spoiler.



Installation Procedure





1. Install the stop lamp to the spoiler.





Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the stop lamp screws to the stop lamp.

Tighten the screws to 2 N.m (18 lb in).

3. Install the spoiler to the rear compartment lid. Refer to Rear Spoiler Replacement (Service and Repair) .