Air Flow Meter/Sensor: Service and Repair

Mass Airflow Sensor/Intake Air Temperature Sensor Replacement

Removal Procedure





1. Remove the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (Service and Repair) .
2. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (2).




3. Remove the MAF/IAT sensor bolts.
4. Remove the MAF/IAT sensor from the air cleaner housing.
5. Remove the MAF/IAT sensor seal, if necessary.



Installation Procedure





1. Install the MAF/IAT sensor seal, if necessary.
2. Install the MAF/IAT sensor to the air cleaner housing.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the MAF/IAT sensor bolts.

Tighten the bolts to 10 N.m (89 lb in).





4. Connect the MAF/IAT sensor electrical connector (2).
5. Install the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (Service and Repair) .