40. Cylinder Head Disassemble

Cylinder Head Disassemble


Tools Required
* J 8062 Valve Spring Compressor
* J 36017 Valve Seal Remover
* J 43963 Valve Spring Compressor (off car)






1. Remove the intake camshaft position sensor and bolt.





Important: Ensure that the valve train components are kept together and identified in order for proper installation in their original position.


2. Using the J 8062 and the J 43963 , compress the valve spring.
3. Remove the valve keys.
4. Slowly release the J 8062 and the J 43963 from the valve spring assembly.
5. Remove the retainer.




6. Remove the spring.





Notice: Do not damage the valve guide. Remove any burrs that have formed at the key groove by chamfering the valve stem with an oil stone or a file.

7. Using the J 36017 , remove the valve seal. Do not reuse the valve seal.




8. Remove the valve.
9. Remove the remaining valves.




10. Remove the cylinder head plugs.