Air Temperature Sensor ( Ambient / Intake ): Service and Repair

Mass Airflow Sensor/Intake Air Temperature Sensor Replacement

Removal Procedure





1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (1).




2. Remove the MAF/IAT sensor screws.
3. Remove the MAF/IAT sensor.



Installation Procedure





1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice (Fastener Notice) .


2. Install the MAF/IAT sensor screws.

Tighten the screws to 0.6 N.m (5 lb in).





3. Connect the MAF/IAT sensor electrical connector (1).