Torque Converter Seal Installation

Torque Converter Seal Installation


Tools Required
* J 8092 Universal Driver Handle
* J 44766 Seal Installer






1. Assemble J 8092 onto J 44766 .

Notice: Install the seal onto the installation tool before installing into the case to prevent damage to the seal.

2. Install the seal (229) onto J 44766 .

Important: Align the torque converter seal with the bolt holes.


3. Install the NEW seal (229) into the housing.

Notice: Refer to Fastener Notice .

4. Install the NEW seal bolts (228).

Tighten the seal bolts to 3.6 N.m (31.86 lb in).

5. Install the NEW input shaft seal (430).