Rear Side Door Sill Trim Plate Replacement (Hatchback)

Rear Side Door Sill Trim Plate Replacement (Hatchback)

Removal Procedure




1. Remove the rear seat cushion and the rear seat back.
Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).
2. Remove the screw securing the rear rocker trim panel.
3. Pry off the rear rocker trim panel.

Installation Procedure




1. Install the rear rocker trim panel.
2. Install the rear rocker trim panel with the screw.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the rear seat back with the bolt and tighten to 25 Nm (18 lb ft).
4. Install the rear seat cushion.
Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).