Rear Quarter Trim Panel Replacement (3 Door Hatchback)

Rear Quarter Trim Panel Replacement (3 Door Hatchback)

Removal Procedure

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).
2. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement (Rear Seat Back Cushion Replacement).
3. Remove the door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (Front Side Door Sill Trim Plate Replacement).




4. Remove the 3 quarter trim panel retaining clips (3).
5. Remove the seat belt lower anchor bolt (1).
6. Remove the rear seat locking pin (4).
7. Remove the quarter trim panel (2) from the vehicle.

Installation Procedure




1. Install the quarter trim panel (2), to the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the rear seat locking pin (4) and tighten to 38 Nm (28 lb ft).
3. Install the rear seat belt lower anchor and bolt (1) and tighten to 38 Nm (28 lb ft).
4. Install the 3 quarter trim panel retaining clips (3).
5. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement (Rear Seat Back Cushion Replacement).
6. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).
7. Install the door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (Front Side Door Sill Trim Plate Replacement).