Rear Compartment Lid Lock Cylinder Replacement (Notchback)

Rear Compartment Lid Lock Cylinder Replacement (Notchback)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Remove the clips and the rear compartment lid trim.
3. Disconnect the electrical connector.
4. Disconnect the lock rod.
5. Remove the bolt and the lock cylinder.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the lock cylinder with the bolt and tighten to 4 Nm (35 lb in).
2. Connect the lock rod.
3. Install the rear compartment lid trim with the clips.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).