Rear Split Folding Seat Back Replacement

Rear Split Folding Seat Back Replacement

Removal Procedure




1. Lower the rear seat backs.
2. Remove the bolts that secure the rear seat backs to the hinges.
3. Remove the rear seat backs by pulling the seat hinge posts out of the front wheelhouse trim.

Installation Procedure




1. Install the rear seat back by inserting the seat hinge posts into the front wheelhouse trim.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the seat backs to the hinges with the bolts and tighten to 25 Nm (18 lb ft).
3. Raise the rear seat backs in the upright position.