Front Seat Replacement - Bucket

Front Seat Replacement - Bucket

Removal Procedure




1. Remove the bolts that secure the rear portion of the seat to the floor.
2. Remove the bolts that secure the front portion of the front seat to the floor.
3. Disconnect the electrical connector from the driver seat.
4. Remove the seat.

Installation Procedure




1. Connect the electrical connector to the driver seat.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolts into the front and rear portion of the front seat and tighten to 25 Nm (18 lb ft).