Cylinder Block Assembly: Specifications

Connecting Rod
Thrust Clearance - End Play 0.07-0.242 mm (0.0028-0.0095 in)
Width 21.838-21.890 mm (0.8598-0.8618 in)
Diameter - Piston Pin 19.012-19.020 mm (0.7485-0.7488 in)
Diameter - Crankshaft 45.999-46.013 mm (1.8110-1.8115 in)
Bending 0.04 mm (0.0016 in)
Twist 0.016 mm (0.0006 in)
Journal Bearing Oil Clearance 0.018-0.064 mm (0.0007-0.0025 in)

Crankshaft
Thrust Clearance - End Play 0.1-0.202 mm (0.0039-0.0080 in)
Journal Outer Diameter
Main 54.980-54.997 mm (2.1646-2.1652 in)
Pin 42.971-42.987 mm (1.6918-1.6924 in)
Journal Bearing Oil Clearance
Main 0.0155-0.047 mm (0.0006-0.0019 in)
Pin 0.019-0.067 mm (0.0007-0.0026 in)
Bending 0.03 mm (0.0012 in)

Cylinder Block
Diameter 79 mm (3.1102 in)
Deck Surface Flatness 0.025/65 mm (0.0010/2.5591 in)
Cylindricity 0.0065 mm (0.0003 in)

Piston
Piston 79 mm (3.1102 in)
Diameter 0.030-0.060 mm (0.0012-0.0024 in)

Piston Ring
Groove Clearance - Top Ring 0.04-0.08 mm (0.0016-0.0031 in)
Groove Clearance - 2nd Ring 0.03-0.07 mm (0.0012-0.0028 in)
Groove Clearance - Oil Ring 0.06-0.15 mm (0.0024-0.0059 in)
End Gap - Top Ring 0.15-0.30 mm (0.0059-0.0118 in)
End Gap - 2nd Ring 0.30-0.50 mm (0.0118-0.0197 in)
End Gap - Oil Ring 0.20-0.70 mm (0.0079-0.0276 in)

Piston Pin
Diameter 19.000-19.005 mm (0.7480-0.7482 in)
Length 49.84 mm (1.9268 in)
Clearance 0.007-0.020 mm (0.0003-0.0008 in)

Crankshaft Pulley Bolt 95 Nm (70 lb ft) + 45° + 15°
Crankshaft cap bolts 50 Nm +50° (36.8 lb ft +50°)