Air Door Cable: Service and Repair

Mode Control Cable Replacement (Notchback)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Remove the audio system. Refer to Radio Replacement (Hatchback) (Service and Repair).
3. Remove the HVAC controller. Refer to Heater and Air Conditioning Control Replacement (Hatchback) (HVAC - Manual).




4. Disconnect the heater/defrost cable eyelet from the post.

Installation Procedure




1. Connect the vehicle heater/defrost cable eyelet to the post and the cable housing to the slide.




2. Install the HVAC controller. Refer to Heater and Air Conditioning Control Replacement (Hatchback) (HVAC - Manual).
3. Install the audio system. Refer to Radio Replacement (Hatchback) (Service and Repair).
4. Install the dash end panel.
5. Connect the negative battery cable.
6. Operate the heating/cooling systems to verify proper function.