Clutch Rotor and Bearing Removal (SP10 Compressor)
Clutch Rotor and Bearing Removal (SP10 Compressor)
Tools Required
J 9553-01 O-Ring Remover
1. Remove the clutch and drive assembly. Refer to Compressor Clutch Plate and Hub Assembly Removal (V5 Compressor) (Compressor Clutch Plate and Hub Assembly Removal (V5 Compressor))Compressor Clutch Plate and Hub Assembly Removal (SP10 Compressor) (Compressor Clutch Plate and Hub Assembly Removal (SP10 Compressor)).
2. Remove the shims using the J 9553-01 O-ring remover.
3. Remove the pulley ring retainer using the snap ring pliers (1).
4. Pull the pulley groove with both hands until the pulley and bearing assembly is free.