Clock Replacement (Notchback)

Clock Replacement (Notchback)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Remove the instrument panel center upper cover.
3. Remove the screws and the clock.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the clock with the screws and tighten to 2.5 Nm (23 lb in).
2. Install the instrument panel center upper cover.
3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).