High Mount Stop Lamp Replacement (Hatchback)

High Mount Stop Lamp Replacement (Hatchback)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Open the hatchback door.
3. Pry open the center high-mounted stop lamp (CHMSL) access cover with a screwdriver.
4. Disconnect the electrical connector.
5. Remove the screws and the CHMSL.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the CHMSL with the screws and tighten to 3 Nm (27 lb in).
2. Connect the electrical connector.
3. Close the CHMSL access cover.
4. Connect the negative battery cable.