Variable Valve Timing Solenoid: Service and Repair

Camshaft Position Actuator Solenoid Valve Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Disconnect the camshaft position actuator valve connectors.
3. Remove the camshaft position actuator valve bolt.
4. Remove the camshaft position actuator valve (1) and seal.

Installation Procedure




1. Install the camshaft position actuator valve (1) and seal. Coat seal with clean engine oil prior to installation.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the camshaft position actuator valve bolt.

Tighten the camshaft position actuator valve bolt to 6 Nm (53 lb in).

3. Connect the camshaft position actuator valve connectors.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).