Spark Plug: Service and Repair

Spark Plug Replacement

Special Tools

KM-6009 Remover/Installer

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Detach the ignition coil cover.
3. Disconnect the ignition coil connector.
4. Remove the ignition coil bolts (1).
5. Install the KM-6009.
6. Remove the ignition coil (2).
7. Remove the spark plugs.

Installation Procedure




1. Install The spark plugs.
2. Install the ignition coil (2).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the ignition coil bolts (1).

Tighten the ignition coil bolts (1) to 8 Nm (70.8 lb in).

4. Connect the ignition coil connector.
5. Install the ignition coil cover.
6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).