Clutch Pedal Replacement (Hydraulic)

Clutch Pedal Replacement (Hydraulic)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Disconnect the return spring from the clutch pedal.
3. Remove the nut, the washer, and the pedal mounting shaft.




4. Remove the locking clip and push rod fixing pin.
5. Remove the push rod from the clutch pedal.
6. Remove the clutch pedal.

Installation Procedure




1. Install the clutch pedal.
2. Coat the push rod with multi-purpose grease.
3. Install the push rod to the clutch pedal.
4. Install the locking clip and push rod fixing pin.




5. Coat the pedal mounting shaft with multi-purpose grease.

Caution: Refer to Fastener Caution (Fastener Caution).

6. Install the pedal mounting shaft, washer, and nut and tighten to 20 Nm (15 lb ft).
7. Connect the return spring to the clutch pedal.
8. Connect the negative battery cable.