Flywheel: Service and Repair
Engine Flywheel Replacement
Special Tools
* J 28647-B - Engine Support Fixture
* KM-6625 - Flywheel Locking Device
Removal Procedure
1. Install J 28647-B - Engine Support Fixture.
2. Remove the manual transmission. Refer to Transmission Replacement (Transmission Replacement) and Transmission Replacement (D16 - Manual Transmission).
3. Install KM-6625 - locking device (1) to block the crankshaft.
4. Install the transmission bolt with KM-6625 - locking device.
5. Remove the flywheel bolts.
6. Remove the flywheel (1).
Installation Procedure
1. Install the flywheel (1).
Caution: Refer to Fastener Caution (Fastener Caution).
2. Install the flywheel bolts.
Tighten the flywheel bolts to 35 Nm +30° +15° (25.8 lb ft +30° +15°).
3. Remove KM-6625 - locking device (1).
4. Install manual transaxle. Refer to Transmission Replacement (Transmission Replacement) and Transmission Replacement (D16 - Manual Transmission)