Gearshift Lever Case Replacement

Gearshift Lever Case Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Remove the rod clamp. Refer to Shift Linkage Adjustment (2. Shift Linkage Adjustment).
3. Remove the console.
4. Remove the gearshift lever housing bolts and the gearshift lever housing.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the gearshift lever housing.
2. Install the gearshift lever housing bolts and tighten to 7 Nm (62 lb in).
3. Adjust the shift linkage. Refer to Shift Linkage Adjustment (2. Shift Linkage Adjustment).
4. Install the console.
5. Connect the negative battery cable.