Windshield Washer Pump: Service and Repair

Washer Pump Replacement (Typical)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Remove the left front left wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the screws and the front wheel well splash shield.
4. Disconnect the electrical connector.
5. Disconnect the washer hose.
6. Remove the washer pump.

Installation Procedure




1. Install the washer pump.
2. Connect the washer hose.
3. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the front wheel well splash shield with the screws.

Tighten the front wheel well splash shield screws to 1.5 Nm (13 lb in).

5. Install the front left wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
6. Connect the negative battery cable.