Transmission Control Replacement

Transmission Control Replacement

Removal Procedure

1. Remove the console top cover. Refer to Front Floor Console Replacement (Front Floor Console Replacement).
2. Remove the shift cables from the shifter assembly. Refer to Shift Cable Replacement (M86 - Manual Transmission).




3. Remove the 2 front mounting nuts (2).
4. Remove the 2 rear mounting nuts (3) and the shifter.

Installation Procedure




1. Position the shifter on the studs and install the front 2 nuts (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 2 rear nuts (3) and tighten to 25 Nm (18 lb ft).
3. Install the shift cables. Refer to Shift Cable Replacement (M86 - Manual Transmission).
4. Install the console. Refer to Front Floor Console Replacement (Front Floor Console Replacement).