Garage Door Opener Transmitter: Service and Repair

Garage Door Opener Transmitter Replacement

Removal Procedure

1. Remove the overhead console. Refer to Roof Console Replacement Roof Console Replacement.




2. Remove the fasteners from the garage door opener.
3. Disconnect the electrical connector and remove the garage door opener.

Installation Procedure




1. Install the garage door opener and connect the electrical connector.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the fasteners to the garage door opener.

Tighten the fastener to 2.5 Nm (22 lb in).

3. Install the overhead console. Refer to Roof Console Replacement Roof Console Replacement.
4. Program the garage door opener after replacement. Refer to Control Module References Programming and Relearning.