Drink Holders: Service and Repair

Front Floor Console Rear Cup Holder Replacement

Removal Procedure

1. Remove the console armrest. Refer to Front Floor Console Armrest Replacement Front Floor Console Armrest Replacement.
2. Open the rear cup holder.
3. Remove the console rear cup holder screws.
4. Pull out on the bottom of the cupholder to disengage the cupholder from the hooks at the top.




5. Remove the console rear cup holder.

Installation Procedure




1. Engage the cupholder to the hooks at the top of the floor console and install the cupholder.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the console rear cup holder screws.

Tighten the screws to 1 Nm (10 lb in).

3. Install the console armrest. Refer to Front Floor Console Armrest Replacement Front Floor Console Armrest Replacement.