Sunshade Replacement (Coupe and Sedan)

Sunshade Replacement (Coupe and Sedan)

Removal Procedure

1. Remove the sunshade from the sunshade retainer.
2. Remove the cover from the screws.




3. Remove the screws.
4. Remove the sunshade.
5. Disconnect the electrical connector, if equipped. It may be necessary to lower the corner of the headliner to access the connector. Refer to Headlining Trim Panel Replacement Headlining Trim Panel Replacement.

Installation Procedure




1. Connect the electrical connector.

Caution: Refer to Fastener Caution Fastener Caution.

2. Position the sunshade and install the screws.

Tighten the screws to 2.5 Nm (22 lb in).

3. Install the cover to the sunshade screws.
4. Install the sunshade to the sunshade retainer.