Folding Top Hydraulic Cylinder Hose Identification

Folding Top Hydraulic Cylinder Hose Identification





Each cylinder is serviced by 2 hoses:

* The rod end (1)
* The closed end (2)





This is a view of the manifold plate on the hydraulic pump. The hoses and plate are numbered to identify their correct locations.





This is a view of the folding top cylinder valve located in the front left of the rear compartment. The hoses and valve body are numbered to identify their correct locations.

Each hose has an identification number stamped on the cylinder side and on the pump side near the connection point. Corresponding numbers are also stamped on the pump manifold plate to aid in identification.

The following chart identifies the hose that supplies fluid to each specific cylinder.