Rear Spoiler Replacement (Sedan)

Rear Spoiler Replacement (Sedan)

Removal Procedure





Caution: Use of harsh chemicals when cleaning can damage exterior lamps. Suggested cleaners are a mild soap and water, or Varnish Makers and Painters (VM&P) Naptha. VM&P Naptha is a specific type of naptha and should not be substituted by any other naptha.

1. Open the rear compartment.
2. Remove the nuts from the spoiler.
3. Remove the spoiler from the rear compartment lid.

Installation Procedure




1. Position the studs of the spoiler into the clearance holes of the rear compartment lid.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the nuts to the rear compartment lid spoiler.

Tighten the nuts to 5 Nm (44 lb in).

3. Close the rear compartment.