Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure




1. Remove the floor console. Refer to Console Replacement Console Replacement.
2. Disconnect the electrical connector (1) from the park brake warning lamp switch.
3. Remove the park brake warning lamp switch screw (2).
4. Remove the park brake warning lamp switch.

Installation Procedure




1. Install the park brake warning lamp switch to the park brake lever assembly.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the park brake warning lamp switch screw (2).

Tighten the screw to 3 Nm (27 lb in).

3. Connect the electrical connector (1) to the park brake warning lamp switch.
4. Install the floor console. Refer to Console Replacement Console Replacement.
5. Check the operation of the park brake warning lamp switch.