Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement (LE5) (2.4L)

Removal Procedure




1. Remove the oil level indicator.




2. Remove the engine harness clip (1) from the oil level indicator tube.




3. Remove the oil level indicator tube bolt.
4. Remove the oil level indicator tube.

Installation Procedure




1. Lubricate the oil level indicator tube O-ring seal with engine oil lubricant.
2. Install the oil level indicator tube.

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the oil level indicator tube bolt and tighten to 10 Nm (89 lb in).




4. Install the engine harness clip (1) to the oil level indicator tube.




5. Install the oil level indicator.