65. Engine Flywheel Installation

Engine Flywheel Installation

Special Tools
* EN-38122-A - Crankshaft Balancer Holder
* EN-43653 - Flywheel Holding Tool
* EN-45059 - Angle Meter

For equivalent regional tools, refer to Special Tools Special Tools.




1. Install the flywheel (1) for vehicles with manual transmission.
2. Install the NEW bolts.

Caution: Refer to Fastener Caution Fastener Caution.

Note: EN-43653 - flywheel holding tool may be used instead of EN-38122-A - holder in order to prevent crankshaft rotation.

3. Holding the crankshaft balancer with EN-38122-A - holder, tighten the bolts evenly. Tighten the bolts to 53 Nm (39 lb ft), plus 25 degrees using the EN-45059 - meter




4. Install the flywheel (1) for vehicles with automatic transmission.
5. Install the NEW bolts.

Caution: Refer to Fastener Caution Fastener Caution.

Note: EN-43653 - flywheel holding tool may be used instead of EN-38122-A - holder in order to prevent crankshaft rotation.

6. Holding the crankshaft balancer with EN-38122-A - holder, tighten the bolts evenly. Tighten the bolts to 53 Nm (39 lb ft), plus 25 degrees using the EN-45059 - meter