Seat Belt Guide Track: Service and Repair

Driver or Passenger Seat Shoulder Belt Guide Adjuster Replacement

Removal Procedure




1. Open the seat belt guide loop cover.
2. Remove the guide loop nut.
3. Remove the guide loop from the guide adjuster bracket.
4. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Garnish Molding Replacement Center Pillar Upper Garnish Molding Replacement.
5. Remove the shoulder belt guide adjuster bracket bolts.
6. Remove the shoulder belt guide adjuster bracket from the center pillar.

Installation Procedure

Note: Verify that the release lever at the top of the bracket is in the full up position.




1. Position shoulder belt guide adjuster bracket to the center pillar.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the shoulder belt guide belt adjuster bracket bolts.

Tighten the shoulder belt guide adjuster bracket bolts to 35 Nm (25 lb ft).

3. Install the upper center pillar trim panel. Refer to Center Pillar Upper Garnish Molding Replacement Center Pillar Upper Garnish Molding Replacement.
4. Install the guide loop to the guide adjuster bracket.
5. Install the guide loop nut.

Tighten the guide loop nut to 35 Nm (25 lb ft).

6. Close the guide loop cover.